|
USA SALES ONLY
|
|
|
Southeastern Automation, Inc. |
Southeastern Automation Product Sheet |
|
|
|
|
FLOW PRODUCTS
|
|
|
Liquid Transit-Time Flowmeters
|
|
|
TransPort PT878 Portable Flowmeter The PT878 is one of the most powerful portable liquid flowmeters available. It measures flow from outside plastic, metal or concrete-lined pipes nonintrusively, so theres no pressure drop, leaks or contamination. Patented correlation algorithms resolve transit-time signals like no other flowmeter and allow the PT878 to measure flow in ultrapure to extremely dirty liquids such as raw sewage and slurries. The PT878 flowmeter is available with English only or with English and a second language. Languages available: Dutch, Castilian, French, German, Italian, Japanese, Portuguese, Russian, South America Spanish, Swedish. |
|
AquaTrans AT868 Ultrasonic Flow Transmitter Accuracy is typically one to two percent of reading with clamp-on transducers, and better than one percent with wetted transducers. Flow measurement range is 0.1 to 40 ft/s (0.03 to 12.2 m/s), for a turndown ratio of 400 to 1. Measurement is obstructionless, causing no pressure drop and is noncontaminating. |
|
AquaTrans UTX878 Flowmeter The AquaTrans UTX878 is a powerful clamp-on ultrasonic flowmeter. It measures flow from outside plastic, metal or any accoustically conductive pipe nonintrusively, so theres no pressure drop, leaks or contamination. Patented correlation algorithms resolve transit-time signals and allow the UTX878 to measure the flow of a variety of liquids. |
|
DF868 Fixed-Installation Ultrasonic Liquid Flowmeter Panametrics Transit-Time mode, with advanced signal coding and correlation detection methods, provides drift-free flow measurements in ultraclean to dirty liquids. This mode handles 80 percent of multiphase liquids-including fluids with gas bubbles, liquid droplets and entrained solids-that previously required Doppler-type meters because conventional transit-time meters failed. Using advanced technology available only from Panametrics, an innovative TransFlection mode expands the DF868 flowmeters measuring capabilities to include applications previously handled only by Doppler meters, such as raw sewage, sludge, slurries and other extremely attenuating multiphase fluids. An optional dual-channel/dual-path model can be configured for a variety of uses including flow measurement in two different pipes, leak detection by measuring at two different locations on the same pipe and dual-path measurement at one location for maximum accuracy. Obstructionless wetted transducers are readily available for maximum performance. After proper installation, transit-time accuracies of better than one percent are achievable in most applications, matching the performance of factory-calibrated meters or meters using expensive spoolpieces. Measurement range is 0.1 to 40 ft/s (0.03 to 12.2 m/s) for a turndown ratio of 400 to 1 in pipes from ½ to more than 200 in (1.27 cm to 5.1 m) in diameter. Measurement is noncontaminating, obstructionless, and causes no pressure drop. The DF868 is all-digital so measurements dont drift, and with no moving parts to wear out or orifices to clog, it never needs regular maintenance. |
|
XMT868i Liquid Flow Transmitter The XMT868i transmitter is a Transit-Time and patented cross correlation signal processor, enabling it to measure flow in applications ranging from ultrapure liquids to extremely attenuating gas-liquid-solid mixtures that were previously handled only by Doppler meters. An optional second channel provides the capability to measure flow in two separate pipes or at two points on the same pipe, further reducing the per-point measurement cost. The second channel can also be configured for dual-path measurement at one location for maximum accuracy. The XMT868i transmitter can be used with any of our proven ultrasonic transducers, including wetted transducers for maximum accuracy and clamp-on transducers for maximum convenience and flexibility. Transducers, flowcells, and fixtures are available in standard and custom configurations for pipe sizes ranging from ½ to more than 200 in (1.27 cm to 5.1 m) in diameter. The XMT868i transmitter measures flow rate from -40 to 40 ft/s (-12.2 to 12.2 m/s) and provides a typical accuracy better than one percent of reading with ±0.2 percent repeatability using wetted transducers, and two percent of reading with ±0.5 percent repeatability using clamp-on transducers. The XMT868i transmitter is ideal for use wherever accurate, reliable and economical long-term flow measurement is critical to process and product quality. This includes applications such as water and wastewater management, sewage treatment, semiconductor manufacturing, hydroelectric, fossil fuel and nuclear power, pulp and paper and energy measurement. Measurement is noncontaminating, obstructionless and causes no pressure drop. |
|
DigitalFlow ISX878 Liquid Flowmeter The ISX878 liquid flowmeter works on 1/2" to 16" pipes with clean fluids. It utilizes advanced clamp-on transducers to interrogate the flow using the patented Correlation Transit-Time(TM) technology. The ISX878 is loop powered, operating on two wires with a maximum power usage of 700 mW. It is easy to program using the 6 button keypad and graphical display or a PC interface using PanaView. It is ATEX rated for use in hazardous locations with an intrinsically safe rating. FM approval is pending. |
|
PanaFlow ISX Ultrasonic Flowmeter PanaFlow ISX is the latest addition to the PanaFlow family of flowmeters. PanaFlow ISX combines the Panametrics transducer and signal processing technologies to provide superior accuracy. It's compact package is an economical solution for ultrasonic liquid flow measurement in hazardous areas. Low Operating Cost The PanaFlow ISX has no moving parts and no periodic maintainence requirements. Its two-wire, loop powered device design reduces expensive copper wires and energy usage. |
|
PanaFlow Meter System The PanaFlow Meter System offers the benefits of ultrasonic flow measurement, including no pressure drop, no moving parts to replace and extremely low maintenance, in a complete flowmeter system package that is preferred in the chemical, oil and gas, and other industries for permanent installation in rugged process environments. |
|
Bundled Waveguide Transducer The Bundled Waveguide Transducer (BWT) System, a technological innovation in ultrasonic flow measurement, is the key for flow measurement in Liquified Natural Gas (LNG) in large pipes. The robust BWT System is the proven solution for cryogenic LNG applications, including the outlet of liquefaction trains and off-loading from ships to storage tanks. In addition to these low-temperature applications, the BWT System is the leading technology for measuring liquids in extreme conditions, including high-temperature, low-density and high-temperature, and highly viscous liquids. Although the installation is wetted, BWT transducers are obstructionless, producing no pressure drop or flashing in the system. The BWT System is compatible with most Panametrics liquid or gas ultrasonic flowmeters. Installations last virtually forever since there are no moving parts. |
|
Steam Transit-Time and Vortex Flowmeters
|
|
|
GS868 Steam Flowmeter & XGS868i Steam Flow Transmitter When measuring steam flow rate, pressure drop caused by orifice or vortex shedding meters robs energy from the steam, reducing the amount of power and heat delivered to the user. Using the GS868 or XGS868i with two ultrasonic transducers that do not protrude into the flow stream, transducer installation is obstructionless, causing no pressure drop and reducing steam generation costs. No regular maintenance is required with the new flowmeters, further reducing long-term cost of ownership. Their titanium transducers have an all-metal boundary and are not affected by erosion from droplets. They will not fail due to thermal expansion cycles. A single GS868 ultrasonic flowmeter can cover a wide range of flows, giving additional savings. Because of their limited turndown ratios, conventional meters are used in multiple runs to cover all steam flow rates during high and low demand periods. Using a single GS868 flowmeter to cover the full range can result in lower capital and installation costs. |
|
PanaFlow MV Mass Vortex Flowmeter PanaFlows multivariable design consists of a vortex shedding velocity sensor, an RTD temperature sensor and a solid-state pressure transducer that measures the mass flow rate of steam, gases and liquids. The PanaFlow vortex flowmeter measures velocity, temperature and pressure in the same location, which provides more accurate process measurement. Integrating pressure and temperature simplifies system complexity and helps minimize initial capital costs, as well as reduce the installation costs. A wide range of options and meter configurations are available to meet your specific application requirements. |
|
|
Bundled Waveguide Transducer The Bundled Waveguide Transducer (BWT) System, a technological innovation in ultrasonic flow measurement, is the key for flow measurement in Liquified Natural Gas (LNG) in large pipes. The robust BWT System is the proven solution for cryogenic LNG applications, including the outlet of liquefaction trains and off-loading from ships to storage tanks. In addition to these low-temperature applications, the BWT System is the leading technology for measuring liquids in extreme conditions, including high-temperature, low-density and high-temperature, and highly viscous liquids. Although the installation is wetted, BWT transducers are obstructionless, producing no pressure drop or flashing in the system. The BWT System is compatible with most Panametrics liquid or gas ultrasonic flowmeters. Installations last virtually forever since there are no moving parts. |
|
Gas Transit-Time Flowmeters
|
|
|
TransPort PT878GC Portable Flowmeter The TransPort PT878GC flowmeter is geared for short-term flow survey work for gas applications. It is especially useful for metering of erosive, corrosive, toxic, high-purity or sterile gases or in any application where penetrating the pipe wall is undesirable. Installation can take as little as 15 minutes and is extremely simple since no tapping or cutting of the pipe wall is required. In addition, installation can be performed without shutting down or otherwise interrupting the process since the meter clamps onto the existing pipe wall. |
|
GM868 Gas Flowmeter & XGM868i Gas Flow Transmitter The XGM868i gas flow transmitter is a low-cost, transmitter-based version of the GM868 general-purpose gas flowmeter. Like the GM868 flowmeter, the XGM868i transmitter uses the ultrasonic transit-time technique for measuring gas flow. It measures flow in virtually every gas in any pipe or duct size from 1 to 120 in (2.5 cm to 3 m) and larger. The transmitter is weatherproof and approved for use in hazardous areas. The wetted transducer designs offer low pressure drop, low maintenance, and accurate measurement over a wide range of flows and compositions. |
|
GC868 Clamp-On Flowmeter The GC868 flowmeter is especially useful for metering of erosive, corrosive, toxic, high-purity or sterile gases or in any application where penetrating the pipe wall is undesirable. Since no tapping or cutting of the pipe wall is required, permanent installation costs are significantly reduced. The meter has no wetted or moving parts, requires no maintenance, causes no pressure drop and has very wide rangeability. |
|
CTF878 Clamp-On Flowmeter The CTF878 flowmeter is especially useful for metering of erosive, corrosive, toxic, high-purity or sterile gases, or in any application where penetrating the pipe wall is undesirable. Since no tapping or cutting of the pipe wall is required, permanent installation costs are significantly reduced. The meter has no wetted or moving parts, requires no maintenance, causes no pressure drop and has very wide rangeability. |
|
GF868 Flare Gas Flowmeter The GF868 flowmeter operates reliably even under unsteady flow, pulsating pressure, varying composition and temperature, harsh environments and the wide flow ranges typical of flare systems. Flow velocity is measurable from 0.1 to 394 ft/s (0.03 to 120 m/s) in pipes or stack sizes up to 120 in (3 m) in diameter. There are no moving parts or orifices to wear or clog. The GF868 flow measurement is independent of the gas properties, and it does not require regular maintenance. |
|
|
PanaFlow Meter System The PanaFlow Meter System offers the benefits of ultrasonic flow measurement, including no pressure drop, no moving parts to replace and extremely low maintenance, in a complete flowmeter system package that is preferred in the chemical, oil and gas, and other industries for permanent installation in rugged process environments. |
|
Gas Pipeline / LNG Flowmeters
|
|
|
Sentinel Gas Sentinel is a two-path meter designed for natural gas applications such as transmission and distribution, pipeline balancing, compressor station metering or when high accuracy is required. |
|
Sentinel LNG (Liquefied Natural Gas) Sentinel LNG extends the use of ultrasonic technology into cryogenic applications. Like the Sentinel LCT, it has no moving parts and uses four-path Robust Path Configuration. Sentinel LNG uses Bundle Waveguide Technology to direct greater tranducer signals into the process while protecting the transducers from cryogenic temperatures. |
|
|
Sentinel LCT (Liquid Custody Transfer) Sentinel LCT is uniquely designed to meet the strict requirements for custody transfer of hydrocarbons. Its four-path, Robust Path ConfigurationTMprovides trouble-free operation that will not drift, even when the liquid product changes in the line. |
|
|
Bundled Waveguide Transducer The Bundled Waveguide Transducer (BWT) System, a technological innovation in ultrasonic flow measurement, is the key for flow measurement in Liquified Natural Gas (LNG) in large pipes. The robust BWT System is the proven solution for cryogenic LNG applications, including the outlet of liquefaction trains and off-loading from ships to storage tanks. In addition to these low-temperature applications, the BWT System is the leading technology for measuring liquids in extreme conditions, including high-temperature, low-density and high-temperature, and highly viscous liquids. Although the installation is wetted, BWT transducers are obstructionless, producing no pressure drop or flashing in the system. The BWT System is compatible with most Panametrics liquid or gas ultrasonic flowmeters. Installations last virtually forever since there are no moving parts. |
|
Accessories
|
|
|
OKS Clamp-on Buffer Transducer The OKS buffer is a solid waveguide that resembles an ice hockey stick. It very effectively conveys ultrasound into the pipe wall to which it is attached. Since the transducers clamp onto existing piping, installation is relatively easy, and there is no need to shut down the process. Typical applications are superheated water, cryogenic liquefied natural gas, and hot hydrocarbon liquids. |
PDF files